![]() It could be anything, floats, pump, alarm, or timer. This water can potentially seep into the water tanks and significantly increase the internal water levels.įurthermore, there could be a problem with one of the septic system's components. If there's too much stagnant water, probably due to a heavy downpour or another cause, it starts accumulating around the septic tank. It could also be due to doing an abnormal amount of dishwashing or too many long showers.Īnother possible cause is groundwater finding its way into the system. This is possibly due to excessive water usage, something like doing excessive loads of laundry. ![]() One of the potential causes for the alarm to go off is excessive water being introduced into the septic system. ![]() This depends on how high the water level continues to be introduced into the system. Given that the timer only allows the pump to turn at specific intervals, it may take several pumping cycles before water is pumped back down to normal levels. As a result, the water levels will significantly increase inside the pump tank until the timer allows the pump to come back on. When excessive water is being introduced into the septic system for whatever reason, it won't have anywhere to go other than the pump tank. Increased water use could be one cause of the overflow, meaning you should be very careful with the entire system. This prevents the drain field from becoming overflowed at any point. The essential time intervals usually happen at specific times of the day. Note that the wastewater is directed into the drain field. This timer plays a vital role in managing the time within which the pump should pump wastewater. In most cases, septic systems with pumps come with a timer installed.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |